Technical Info

State-of-the-art technology has been used for the tensile testing machine.

The results:

An effective object-length in the 14000 kN section of 2,5 to appr.10 metres
1200 mm of available operating space under the centre line in the 10-metre section.
2400 mm of available operating space across the 10 metre width section.
A maximum load of 1428 metric tonnes (14000 kN)
An adjustable fixed pull-head, which can be moved at intervals of 5 metres in the narrow extension.
The stroke of the tensile machine is approximately 4,4 meters.
Load can be applied at speeds between 1 and 1000 kN per minute depending on the material tested.
The stroke is limited to 500 mm for loads greater than 650 metric tonnes.
A fully computer-controlled tensile testing machine.
Electronically measured load using a load cell.
A maximum deviation of 1 % from the measured value.
A video system, which enables monitoring and recording of the test.
The machine has a RS232 port with actual force ouput through ASCII format , ideal for loadcell callibration

Gallery